English
- إرجاع مجاني بسهولة
- أفضل عروض
ANYCUBIC Wash and Cure Machine 3.0, 2 in 1 UV Washing and Curing Station for ANYCUBIC Photon Mono 2 Mars Series LCD/DLP/SLA 3D Printer Models, with Twistable Gooseneck Light
احنا آسفين! المنتج ده مش موجود.
1
متوفر قريبا
الميزات الأساسية
- Localized Strengthening, Uniform CuringThe "Innovative Flexicure Gooseneck Light Design" increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the local curing effect. By adopting a brand new
- Larger Wash&Cure SizeAnycubic Wash & Cure 3s maximum cleaning volume is up to 165*100*180mm, The total volume of the cleaning bucket has been expanded to 4L. The curing size is up to 160*180 mm, to accommodate larger and more models for sing
- Detergent SavingAnycubic wash and cure 3 machine's double-layer PP material cleaning basket designed with two heights at 3.93'' and 6.49'', to flexibly accommodate print platforms from 5.9" to 7.3". The amount of IPA used can be adjusted accord
- Wide CompatibilityEnlarged size enables ANYCUBIC Wash & Cure 3 Station to be compatible with anycubic photon mono 2, mars 3 series, mars 4, mars 4 ultra and other consumer-grade resin 3D printers measuring 7.3'' and below available on the marke
- Simple Operation, Quiet and EfficientOne click to select cleaning and curing dual mode & switch the Gooseneck light curing mode. Infinite rotary knob control, 1 to 30 minutes adjustment. Besides, The decibel when the machine is running does not
ANYCUBIC Wash and Cure Machine 3.0, 2 in 1 UV Washing and Curing Station for ANYCUBIC Photon Mono 2 Mars Series LCD/DLP/SLA 3D Printer Models, with Twistable Gooseneck Light
في عربة التسوق 
مجموع العربة 0.00 جنيه
