نظرة عامة【Packaging list】:u003cbru003eCharging dock X1, battery X2, battery cover X2, USB Type C magnetic suction head X4, magnetic suction head removal pin X1, 1.2-meter charging cable X1, user manual X1u003cbru003eu003cbru003eRequired charger output: 5Vu003e2Au003cbru003e1. When the charging dock is equipped with a VR helmet and two handles charging simultaneously, in order to provide sufficient current, it is necessary to equip the charging dock with a charger with an output of 5V2A or higheru003cbru003e2. The original charger included in the 0culusQuest2 package is suitable for this charging docku003cbru003eu003cbru003e【Steps for helmet charging】:u003cbru003e1. Connect a 5V2A or higher charger to the charging dock (charger not included in this package, customer needs to purchase separately). The charging dock will light up green and enter standby mode when powered onu003cbru003e2. Insert the Type-C magnetic suction head into the charging hole of the helmetu003cbru003e3. Place the helmet vertically into the corresponding charging position of the charging dock, and at the beginning of charging,The LED indicator light of the seat charger is yellowu003cbru003eu003cbru003e【Steps for charging the controller】:u003cbru003e1. Connect a 5V2A or higher charger to the charging dock (not included in this package, customers need to purchase it separately). The charging dock will light up green and enter the power on standby modeu003cbru003e2. Slide the battery cover of the handle downwards and remove the battery coveru003cbru003e3. To install the battery on the controller, please make sure that the Type-C charging port of the battery is facing upwards as much as possible during installationu003cbru003e4. Install the battery cover provided in this package onto the handleu003cbru003e5. Adjust the Type-C charging port of the battery to align with the hole on the battery cover using the needle provided in this packageu003cbru003e6. Insert the magnetic suction head into the Type-C charging port of the battery through the hole on the battery coveru003cbru003e7. Place the handle into the corresponding charging position of the charging dock to allow the magnetic suction head to come into contact for chargingu003cbru003eu003cbru003eAt the beginning, the LED indicator light of the seat charger will turn yellow (please note that the handle has a left and right distinction, please place the handle according to the L and R markings on the seat charger)u003cbru003eIf you want to remove the magnetic suction head of the handle, please use the needle provided in the packaging to remove the magnetic suction headu003cbru003eu003cbru003e【Specifications】:u003cbru003e*Battery type: Polymer lithium batteryu003cbru003e*Battery capacity: 1800mAhu003cbru003e*Handle battery usage time: approximately 36 hoursu003cbru003e*Charging current: Helmet: maximum 1.4A Handle: maximum 500mAu003cbru003e*Charging time: Helmet: approximately 3.5 hours Handle: approximately 2.5 hoursu003cbru003eu003cbru003e【Seat charging indicator light】u003cbru003e*Standby mode: green lightu003cbru003e*Charging: yellow lightu003cbru003e*Full: Green lightu003cbru003e*Compatible with third-party headsetsu003cbru003e
استرجاع مجاني وسهل
أفضل العروض
