نظرة عامةMounting Type: Wall Material: Brass Packaging: Boxed Box Contents: Mounting apparatus, screws in their packages (in the type specified in the packaging section of the product features), are carefully prepared and sent in cargo without being damaged. In Pre-Mounting Cases; Separate the mounting materials that come out of the product packaging from the product. Before mounting the product, clean the surface and the product with a damp cloth. Change the location of the items in the mounting area that will make your job difficult during assembly. During Mounting; Align and mark the mounting pin that comes out of the product packaging according to the place where you will mount it on the wall. Then, using a drill, open a hole the size of the dowel to fit in. During this time, you can prevent dust from spreading around with the help of a broom during the drilling process in order not to get the surroundings dirty. After opening the hole, place the dowel firmly into the slot with the help of a hammer. Then, you can screw the mounting pin by matching it to the hole. After screwing, insert the product straight into the mounting pin and place the product on the pin using the allen key or flat screwdriver, depending on the product, that comes out of the packaging. After assembling the product, you can check whether the product is standing flat with a spirit level for a final check. During Use; Since our products are made of brass material and covered with a quality coating, they will serve you for many years. In case of any contamination, etc., you can wipe them with a damp and dust-free cloth. Be sure to dry the product after cleaning. If the cleaning water is calcareous, it may leave stains on the product. If the product is going to be kept in an environment under construction for a long time, be sure to cover it with a protective bag. We wish you to use it in good days.
استرجاع مجاني وسهل
أفضل العروض
