Overview4-piece set: 2 pieces for front door+2 pieces for rear door.
Size：Front door 2 pieces: 26.5x4.5cm/2pcs. Two rear doors: 54.5x4.5cm/2pcs.
Usage Introduction:
Single color streaming light when opening the door: Before installation, press and hold the switch for 3 seconds to light up the threshold light. Click the switch to switch modes. Place the sensor paper at the sensing area for testing. The intelligent sensing distance is 2-3cm and the light will automatically turn off. After removing the light, install the sensor paper under the corresponding sensing area of the car door.
Installation steps:
1. Use adhesive to wipe the door threshold.
2. Place the door sill and compare the installation position.
3. Remove the Velcro backing adhesive for installation.
4. Press and hold the switch for 3 seconds to turn on/off.
5. Place the sensing paper at the sensing location for testing.
6. Simply align the sensing paper with the sensing area and stick it onto the bottom of the car door.
Usage function:
1. Long press the switch for 3 seconds to power on and click (switch color mode).
2. Apply infrared sensing paper to the bottom of the car door, corresponding to the sensing area.
Free & Easy Returns
Best Deals
