5-Dof Robot Arm Kit 5AXIS Robotics

Sorry! This product is not available.

Product Overview

Overview

Adeept 5-DOF Robot Arm Kit 5Axis Robotic Compatible with Arduino IDE Programmable DIY Coding STEM Robotics Arm with OLED Display Processing Code and PDF Tutorials - Black

DIY Robot Kit | STEAM Robot Arm Kit with OLED Screen

A robotic arm that can mimic human arm and hand movements can be programmed to pick up and move objects or use tools automatically.

5-DOF Robotic Arm Kit Compatible with Arduino IDE | 5 Axis Robot Arm Programmable Robot DIY Coding Robot Kit | STEAM Robot with OLED Screen

5-Axis Robotic Arm Kit

This is a desktop mini robot arm that can do many things. It is compatible with Arduino IDE and can be controlled in multiple ways. Since it is completely open source, you can extend more self-defined functions and operations.
The 5-Axis claw allows the robotic arm to move flexibly, gripping objects in any direction. Designed for beginners and professionals to learn AI, robotics, programming and electronics.

3 Modes and More...

Learning Mode:

Write code to control the robotic arm to perform specific movements. Press the marked key on the computer, then the robotic arm kit can follow your commands and perform the corresponding action.

Drawing Board Mode:

You can draw lines on a fan-shaped board on the computer, then the robotic arm can draw the same shape on paper.

Memory Mode:

Make the control card record this step by pressing the red button briefly, record the remaining steps in this way, when all the steps are finished, press the red button for a while (3 seconds), it will repeat the steps in the order.

Oled Screen

Oled screen can show current states and remaining steps, which can help you know the processing well.

5 Axis

The gripper opens to 3.66 inches and 90 degrees, 180 Degree radial wrist movement, 180 Degree wide elbow range of motion, 180 Degree base rotation. 4-Axis design allows the robotic arm to move flexibly, capable of gripping objects in any direction.

Basis

With round base design, the arm can rotate without any wobble. It is built into a stainless steel bead that allows the arm to rotate smoothly.

Suction Cup Design

By using the vacuum canister, the robot arm can be rigidly fixed on the table to prevent the robot arm from slipping due to movement.

Component List:

1 Set Acrylic Plate; 1x Bearing;

1x Adeept Robotic Arm Driver Board;

1x 0.96'' OLED Screen; 4x Suction Cup;

6x Servo(MG90S); 1x Battery Holder;

1x Cross Socket Wrench;

1x Cross Screwdriver;

1x Winding Pipe; 1x Micro USB Cable;