5T electric hydraulic jack with impact wrench
Electric jacks use
Park the car on a level road and turn off the engine. Do not forget to tighten the handbrake.
Place the electric jack on the steel beam under the body near the replaced tire align the top cap of the electric jack with the support point below the vehicle body so that the electric jack can be safely and effectively hoisted.
Connect the electric jack to the 12V power supply in the following two ways
Operation: After confirming that the first few steps are completed, you can start the lifting operation. Hold the remote control, and press the button on the remote control as needed. means increase, means decrease, "means stop.
During the lifting process, the lifting dynamics should be carefully observed to ensure that the electric jack does not tilt until the wheel is separated from the ground by 20mm. When the wheels can rotate freely, the lifting should be stopped and the tire replaced.
Electric wrench use
Colour Name | Multicolour |
Country of Origin | China |