العربية
  • Free & Easy Returns
  • Best Deals
العربية
Wishlist
wishlist
Cart
cart

Cr-Pla Rainbow 3D Printer Filament 1.75MM

Sorry! This product is not available.
1
Available Soon
trusted_shipping_usp_v2
TRUSTED SHIPPING
Free shipping when you spend EGP 200 and above on express items
secure_usp
SECURE SHOPPING
Your data is always protected
Overview
Overview
ColorColored


PLA Filament

PLA (Polylactic Acid) is an organic biopolymer and thermoplastic produced from corn starch and cane. Therefore, it is not harmful to human health. It has a brighter appearance compared to ABS. A 3D Printer using FDM technology can print PLA. Apart from 3D printer; It is also found in some packaging materials, stretch films, plastic containers and plastic water bottles.

Key Features of PLA Filament
It is much easier to print than ABS.
It has a hard structure. It is durable and resistant to impacts.
It has slight flexibility, but is brittle.
It is difficult to dissolve with acetone.
The printing temperature is generally between 190°C and 220°C.
No lifting or cracking problems are encountered during cooling.
Bed temperature is recommended between 50°C and 70°C.
With once set temperature, bed calibration and production speed, printing can be done without any problems.
Usage Areas of PLA Filament
Since PLA has a brighter appearance, it is used in areas that appeal to the eye and in places that may be in contact with the human body because it is not harmful to health. For example; such as toys, architectural scale models, kitchen utensils, cookie molds, storage containers. In addition, we recommend that you do not use PLA for your models that will be constantly exposed to sunlight. Additionally, as you can see in the table in the Detailed Comparison of ABS and PLA section, we recommend that you do not wash products made of PLA at temperatures higher than 60°C.

Product name: CR-PLA Filament
Density: 1.24 g/cm³
Tensile strength: 51MPa
Bending strength: 86MPa
Impact resistance: 10.5J/?
Recommended printing temperature: 190-230 °C
Recommended hot bed temperature: no heating -60 °C
Recommended printing speed: 40-120 mm/sec
Recommended fan speed: 100%
Suggest Printing Surface: Suggest printing surface, tempered glass, mask tap, glue stick
Filament diameter: 1.75±0.03mm
Product Net Weight: 1Kg / 2.2lb
Product Gross Weight: 1.29Kg / 2.8lb
Packing size: 210*210*70mm
certification: RoHS, REACH, MSDS

Specifications
Colour NameColored
Cr-Pla Rainbow 3D Printer Filament 1.75MM

Cr-Pla Rainbow 3D Printer Filament 1.75MM

Added to cartatc
Cart Total EGP 0.00
Loading