Electric leg massager, suitable for rechargeable pneumatic massage of thighs and calves, automatic kneading/3 modes and 2 intensities

OverviewSpecification of hot press massager package: Material: Cotton and linen+ABS Color: Grey Size: Package 59 * 35 * 0.25cm, Controller 135 * 60 * 39mm Charging method: USB charging Charging time: 3H Operation time: 2-5H Rated power: 4.5W Rated voltage: 5V Timer: 15 minutes Battery capacity: 2000mAh/leg massager How to use a leg massager 1. Before use, please check if the massager can be started. If it cannot be started, please use the included charging cable to charge the massager before use. 2. Separate the adhesive part of the massager Velcro to fully unfold the product. 3. Tie the massager to the lower limbs and calves, with the correct wearing direction of the main button facing up and the digital screen facing down, and adjust the appropriate tightness. Attention: The product can be worn under clothing for use. 4. After long pressing the power button to turn on the device, the buzzer will sound continuously, and the product will enter the mild massage mode and the resistance hot compress mode. The digital screen of the host will display the corresponding functions, and the resistance hot compress mode green light will turn on (after long pressing to turn on the device: only the massage version enters the low-end massage mode; only the hot compress version enters the low-end hot compress mode) 5. Lightly press the switch to switch massage mode when turned on. Gentle: Soothing legs Moderate: Rubbing and relaxing; Strong: Lift Massage (Upgraded massage mode intelligently matches intensity, no need to adjust gear separately) (When turned on: Simply press the switch on the massage board to adjust the massage mode, press the gear key to adjust intensity; only when applying hot compress, press the gear key to adjust the temperature of the hot compress.) 6. In the power on state, lightly press the "Remarks" button to adjust the gear from low to high, adjusting the first gear low gear L, the second gear medium gear M, and the third gear high gear H. seven When turned on, long press the "Remarks" button to adjust the heating temperature. When turned on, it defaults to low temperature green. After long pressing the "Remarks" button for 2 seconds, the screen display light will turn red, indicating high temperature mode; Press and hold for 2 seconds, the screen display light will turn off, then turn off the hot compress mode and cycle in sequence. eight After booting up, the default setting time is 15 minutes. After the time is up, the buzzer will emit a long sound, turn off all loads, and enter a stop state.