Eos Nocut VV910 Impact Resistant Polyethylene Knitted/Driver Driver Glove

PRODUCT DESCRIPTION

High performance polyethylene backing. Thermoplastic (TPR) reinforcement on back and fingertips. Smooth nitrile coating/foam nitrile on palm and fingertips. Embossed internal reinforcement on palm. Kevlar® thread on all seams. Backing: High performance polyethylene fibers. Coating: nitrile. Rear reinforcement: TPR. Reinforcement on thumb/index finger: PVC.   Ref. : VV910 Double nitrile coating for oily work 1. smooth nitrile coating: repels oils 2. nitrile foam coating: good adhesion Flexible reinforcements Increased protection against impacts and pinches Reinforcement between thumb and forefinger and in the palm Increased protection Metacarpal protection against impacts in the area. The force transmitted to the back of the hand after a 5J energy pulse cannot exceed 4 kN Can only be used with a head card Very good abrasion and cut resistance Increased lifetime Kevlar® thread stitching Increased lifetime 8 cm cuff with Velcro closure Perfect adjustment Less discomfort on the wrist during long-term use. Safe, high-quality and very comfortable; EOS NOCUT is definitely one of the most popular gloves on the market!

 REGULATION (EU) 2016/425 EN ISO 21420:2020

General requirements  

EN388:2016+A1:2018 Protective gloves against Mechanical Risks (Levels are obtained on the palm)   4Abrasion resistance (1 to 4) EN ISO 13997) (A to F)Protection against impact in the metacarpal region (P)

(EN13594:2002 6.8.2) EN13594:2002 4.1.3/6.8.2. Impact energy attenuation  

US STANDARDS ANSI-ISEA 105:2016 Hand protection   A4Resistance to cuts by sharp objects (A1 through A9) ANSI-ISEA 138:2019 Performance and Classification for Impact Resistant Gloves.   1Impact resistance (from 1 to 3)