ESP32-WROON-32 Wifi Bluetooth Development Module 30 Pin(Type-C Input)

If you are interested in connecting your project to the Web and being part of an IOT (Internet of Things) project, this development board is for you! Like other microcontrollers and microprocessors, ESP32 has built in power regulation circuits, onboard antennas, noise filters, and fits conveniently on any breadboard for quick prototyping.

ESP32 can interface with other MCUs as a master or slave, or operate completely autonomously via SPI/SDIO, I2C, and UART. The microcontroller can also support multiple sensors via an SD card and 32 GPIO pins (all of which can be used for PWM).

Only the antenna types are different between the ESP32 WROOM-32U Wifi Bluetooth Development Module and ESP32-WROOM-32D Wifi Bluetooth Development Module. Other than that, all the features are exactly the same.

It is a development board that contains the ESP32-wroom-32 controller. Esp32-wroom-32 is a higher version of the esp8266 nodemcu model. Unlike nodemcu, there is also an internal bluetooth unit in the module. In addition to this feature, it is preferred in many IOT (Internet of Things) projects.

It supports BLE connections. It also has features such as IP Audio processing and Mp3 playback.

ESP32-WROOM-32 32 Bit 240Mhz 4 MByte Flash CH341 Usb Uart IO Sensor Home Automation Industrial Machine Control Iot ESP-32

The product has ESP32-WROOM-32. It has 4Mb flash memory.

Features 

Integrated: ESP32-WROOM-32-Type C

There is no need to install drivers in the Win10 operating system. does not hear.

There is an internal PCB antenna on the ESP.

Supported Modes: AP, STA and AP+STA

It houses 2.4Ghz dual-mode Wifi and Bluetooth chipset with TSMC 40nm low power technology.

It supports BLE.

Audio Support: CVSD and SBC

Çoperating voltageı Type C USB DC 5V

'Operating current': 80mA

CH341 usb ttl converter integrated

Support LWIP protocol, FreeRTOS

Üç mod support: AP, STA and AP + STA

Processor: 32bit dual-core 240 MHz Tensilica LX6

ÇIp Supply Voltage:3.3V

SRAM: 520KB

Flash: 4 MBytes

Wi-Fi Protocol: 802.11 b/g/n/d/e/i/k/r

Bluetooth Protocol: BLEv4.2 BR/EDR

Çenvironmental: UART, SPI, I2S, ADC, DAC, I2C

Esp Ide, Micropython, Arduino, Scratch and mixly programming support

Power indicator LED

User led

En and Boot  button

2 pcs 15 pin male header soldered sockets

Header pin spacing: 2.54mm / 100mil

Operating Temperature: -40°C to +85°C

4 mounting holes

It can be easily used in IoT projects.

Size:   28.5mm x 51.6mm

Weight: 10gr

Package 's231'

1 Piece ESP 32 Programming Card