Internal SSD 1 TB

OverviewA solid-state drive (SSD) is a solid-state storage device that uses integrated circuit assemblies to store data persistently, typically using flash memory, and functioning as secondary storage in the hierarchy of computer storage. It is also sometimes called a semiconductor storage device, a solid-state device or a solid-state disk, even though SSDs lack the physical spinning disks and movable read–write heads used in hard disk drives (HDDs) and floppy disks. SSD also has rich internal parallelism for data processing. There are two main configurations for implementing hybrid drives: dual-drive hybrid systems and solid-state hybrid drives. In dual-drive hybrid systems, physically separate SSD and HDD devices are installed in the same computer, having the data placement optimization performed either manually by the end user, or automatically by the operating system through the creation of a "hybrid" logical device. In solid-state hybrid drives, SSD and HDD functionalities are built into a single piece of hardware, where data placement optimization is performed either entirely by the device (self-optimized mode), or through placement "hints" supplied by the operating system (host-hinted mode). SSDs can use traditional HDD interfaces and form factors, or newer interfaces and form factors that exploit specific advantages of the flash memory in SSDs. Traditional interfaces (e.g. SATA and SAS) and standard HDD form factors allow such SSDs to be used as drop-in replacements for HDDs in computers and other devices. Newer form factors such as mSATA, M.2, U.2, NF1/M.3/NGSFF, XFM Express (Crossover Flash Memory, form factor XT2) and EDSFF (formerly known as Ruler SSD) and higher speed interfaces such as NVM Express (NVMe) over PCI Express (PCIe) can further increase performance over HDD performance.