Color

White

Cata LED Strip 10 Chips Green Light 5Mt Ct-4483

REQUIRED INFORMATION

Cata LED Strip Indoor LED Strip is Sold as a 5 Meter Package. There are Scissor Cutting Points at Every 50 mm. It Has Its Original Tape.

Number of LEDs is 60, LED Light Angle is 120 Degrees. It Works with 12 Volts. It does not work with 220 Volts. You must use a LED transformer. How many meters you will use the LED transformer for is stated below Extra Thick Pcb 10 Chip High Lumen New Technology

Transformer calculation according to led strip meter

According to Meter Calculation, You Need to Get These Codes from Transformers

CT-2558 2AMPER 2 meters

CT-2559 3AMPER 10 foot

CT-2574 5AMPS 4 meters

CT-2576 10 AMPER 7 meters

CT-2560 12.5 AMPER 10 meters

CT-2561 17 AMPER 15 meters

CT-2577 21 AMPER 18 meters

ct-2578 25 Amperes 25 Meters

ct-2575 27 AMPER 18 Meters

ASSEMBLY

1- Before installing the product, the surface to be installed must be clean and dry

2- After sticking the led strip on the surface, adjust the cables so that they come to the connection points of the transformer

3- Usually red wire is positive ( + ) black wire is negative ( -)

Led Electric, Led Lighting Converts Its Energy To Shining Light Energy, You Provide More Than 70% Efficiency. Flexible Led Strip Lighting Thanks to its flexibility, it provides easy installation to our customers.

It is mostly used as Decorative lighting for Homes, Shopping Centers, Entertainment venues

PRODUCT ADVANTAGES

a-FLEXIBILITY strips can be adjusted according to customer's request

b- EFFECTIVE ENERGY high efficiency More than 1/3 energy savings compared to fluorescent lamps. It provides energy savings compared to bright lamps.

c- ENVIRONMENTAL FACTOR It is free of mercury and operates silently.

d-LONG LIFETIME, it works for more than 25000 hours with its low energy.

e-SAFETY It operates with voltage that will not harm the human body.

What is LED Strip?

Strip LEDs; They are thin conductive circuit tapes containing LEDs (and other components) with a small surface area.

They are created by arranging small LED bulbs on a flexible and thin strip.

Strip LEDs have flexible usage areas.

It can shine light on hard-to-reach areas, attach to bendable things,

It can follow the contours of non-linear shapes and shine in any color you can imagine.

They are self-adhesive and can be easily adhered to surfaces such as metal, glass and wood.

There's a lot you can do with LED strips due to their compact size, brightness and variability.

Generally, there are 60 LEDs per meter. There are single-chip and three-chip ones.

However, single-chip ones with 60 LEDs per meter are commonly used.

3-chip LEDs with 30 LEDs per meter are also available. Almost most of them

Since it is supplied with 12 Volt DC current, adapters that reduce 220 Volts to 12 Volts are used for LED strips.

In the transformer;

The input indicated by the letter L depends on the phase of the mains electricity,

The input indicated by the letter N is the neutral of the network,

The input shown with the ground symbol must be connected to ground, that is, GND.

V+, from which we get 12V output, is connected to the (+) input of the strip LED (red wire).

COM should be connected to the (-) input (black wire) of the strip LED.

Colour Name	White
HS Code	853952000000

LED Strip 10 Chips Green Light 5m CT-4483