If the sensor cannot be connected?
Please ensure that the host and transmitter normal obstacle-free (100m will be received normally); Please note that the host transmitter installed on the battery after power on, the transmitter will receive the host signal within 3 minutes; In addition, you can long press the alarm + CLR button for 3 seconds can be forced to enter the long reception mode; Finally, you can replace the battery or re-switch the power.
★★★Specifications★★★
Display Temperature Range:-10℃~60℃(14℉~140℉);
Sensor Temperature Range:-40℃~60℃(-40℉~140℉)
Wireless Range:30m (98.4 ft). (signal range is impacted by sensor location and may vary).
Wireless Frequency:433 MHz
Display: 2 x AAA batteries (Not included)
Freezer Sensors: 4 x AA batteries (Not included)
Sensor 1 Refresh Rate: 57s.
Sensor 2 Refres Rate: 67s.
★★★Package Included★★★
1 x Main Unit
2 x Transmitters
1 x User Manual
★★★Note★★★
- Don’t disassemble the product freely.
- While the indication is blurring, please change the battery.
- Don’t put this product in the place where it is hot, humid, dusty or full of corrosive gas, in case that its electronic components are damaged.
- It will not alarm at once when temperature exceeds pre-set. It will compare the temperature after 10 minutes. And when temperature reaches alarm value, the thermometer will alarm immediately.