Saray Bathroom Alegra Hanger 3 Pieces

OverviewMounting Type: Wall Material: Brass Packaging: Boxed Box Contents: Mounting Devices, screws Warranty: 5 YEARS Products are carefully prepared and shipped in their original package (the type specified in the packaging section of the product features) to prevent damage in cargo. In Pre-Mounting Cases; Separate the mounting materials that come out of the product packaging from the product. Before mounting the product, clean the surface and the product with a damp cloth. Change the location of items in the mounting area that will make your job difficult during assembly. During Mounting; Align and mark the mounting pin that comes out of the product packaging according to the location where you will mount it on the wall. Then, using a drill, open a hole the size of the dowel will fit. In the meantime, in order to prevent the surroundings from getting dirty, you can prevent dust from spreading around with the help of a broom during the drilling process. After drilling the hole, place the dowel firmly into the slot with the help of a hammer. Then, align the mounting pin with the hole and perform the screwing process. After the screwing process, place the product on the mounting pin in a straight manner and place the product on the pin using the Allen key or flat screwdriver provided in the packaging. After assembling the product, you can check whether the product stands straight with a spirit level for a final check. During Use; Since our products are made of brass material and covered with a quality coating, they will serve you for many years. In case of any contamination, etc., you can wipe them with a damp and dust-free cloth. Be sure to dry the product after cleaning. If the cleaning water is calcareous, it may leave stains on the product. If the product is to be kept in an environment under construction for a long time, be sure to cover it with a protective bag. We wish you to use it in good days.