Chrome Volkswagen Passat B5 2005 Chrome Door Handle

Assembly Instruction:

1- Assemble in a dry and dust-free environment.

2- Ambient temperature during assembly must be between 15°C and 35°C. If the ambient temperature is below 15°C, do not use a hair dryer etc. on the surface. Install by heating.

3- Before removing the tapes of the part to be adhered, make an assembly test, starting from the oval and closed surface.

4- Clean the surface to be bonded meticulously with a cotton cloth, rubbing alcohol or pure alcohol. After cleaning the surfaces to be bonded protect from dust and grease. DO NOT clean the surface to be bonded with oily or additive substances such as wet wipes, water, thinner, gasoline, diesel fuel or cologne.

5- After applying the cleaning process to the surface to be bonded, wait for 5 minutes and start the bonding process.

6- Remove the protective surface of the double-sided tape on the product and assemble it again starting from the oval and closed surface.

7- In the assembly process, rub it over the product with a soft cloth or fingertips. One minute of printing on the piece and again a hair dryer, etc. Apply heat with the help of

CAUTION :
As the tape used will show its full properties within 24 hours, use the glued part carefully during this period.
In order not to loosen the adhered part, tape it with paper or packaging tape that you can remove after 24 hours.
Take care not to wash your car within 24 hours.