English
- استرجاع مجاني وسهل
- أفضل العروض
1
متوفر قريبا
الميزات الأساسية
- Always use recommended solder-less terminals: Fork terminal with isolation (M3 screw, width is 7.0mm (6.0mm for DTB 4824), hole diameter 3.2mm). Screw size: M3 x 6.5 (With 6.8 x 6.8 square washer). Screw size for DTB4824: M3 x 4.5 (With 6.0 x 6.0 s
- Do not allow dust or foreign objects to fall inside the controller to prevent it from malfunctioning
- Never modify or disassemble the controller and . Do not connect anything to the “No used” terminals
- This controller does not provide overcurrent protection. Use of this product requires that suitable overcurrent protection device(s) must be added to ensure compliance with all relevant electrical standards and codes. (Rated 250 V, 15 Amps max).
- A suitable disconnecting device should be provided near the controller in the end-use installation.
- The programmable PID control function allows DTC to set up 64 sets of temperature and control time.
- This controller is an open-type unit and must be placed in an enclosure away from high temperature, humidity, dripping water, corrosive materials, airborne dust and electric shock or vibration.
- This instrument is not furnished with a power switch or fuse. Therefore, if a fuse or power switch is required, install the protection close to the instrument. Recommended fuse rating: Rated voltage 250 V, Rated current 1 A
المواصفات
| رقم الموديل | DTC2000C |
| اسم الموديل | DTC2000C |
Delta Controller DTC Delta DTC DTC2000C DTC2000C
تمت الإضافة لعربة التسوق
مجموع السلة 0.00 ر.س.
