Licensed Power Adapter Standard V2

Raspberry Pi Licensed Power Adapter Standard V2

• Raspberry Pi Licensed Power Adapter Standard V2 with its renewed design
• To ensure that you do not have any problems with the full performance of Raspberry Pi products and long operating times, we recommend the Raspberry Pi Licensed Power Adapter Standard V2.
• Compatible with Raspberry 1 / 1+ / 2 / 3 / 3+ models and Raspberry Pi Zero, Zero W Zero 2 W.

It is not compatible with Raspberry Pi 4.

Properties:

• Output voltage: +5.1V DC
• Minimum load current: 0.0A
• Rated load current:2.5A
• Maximum power: 12.5W
• Load regulation: ±5%
• Line regulation: ±2%
• Ripple and noise: 120mVp-p
• Rise time: 100ms maximum to regulation limits for DC outputs
• Turn-on delay: 3000ms maximum at rated input AC voltage and full load
• Protection: Short circuit protection
• Overcurrent protection
• Efficiency: 80.73% minimum (output current from 100%, 75%, 50%, 25%)
• Output cable: 1.5m 18AWG
• Output connector: micro USB
• Input Voltage range: 100–240Vac (nominal)
• 96–264Vac (operating)
• Frequency: 50/60Hz ±3Hz
• Current: 0.5A maximum
• Power consumption (no load): 0.075W maximum
• Initial current: No damage will occur and the input fuse will not blow.