12VOLT Diesel Transfer Pump Submersible Milk Liquid Water Transfer 3/4

MIDAPO 12 VOLT 3/4 HOSE INLET MINI SUBMERSIBLE PUMP

FITS INTO THE BARREL EASILY 

GUARANTEED FIRST QUALITY IMMERSION PUMP

Setup;

The installation of the Midapo Mini Submersible Pump is extremely simple, attach the required length of hose to the pump and then immerse the pump into the liquid you want to transfer. Then, according to the power requirement of the pump, it becomes ready for use by correctly connecting it to the required 12 Volt power source,

Let the pump rest every 20 minutes.

Use;

Midapo Mini Submersible Pump (underwater) is designed to work by being completely submerged in water. After completing the installation, place the mini submersible pump in the liquid you want to transfer and hold the end of the hose or the water gun to the place you want to transfer, then you can transfer the liquid you want to transfer by operating your MIDAPO Diver with the on/off button.

You can use the MIDAPO Mini Submersible Pump in liquids such as diesel oil, water, etc. It provides rapid transfer with a liquid transfer rate of 15 to 20 liters per minute.

It should never be used with flammable or explosive substances such as GASOLINE AND THINNER.

AREAS OF USE,

-Garden irrigation

-At the car wash

-For washing boats and draining the water inside the boat

-In transferring diesel fuel in vehicles such as construction machines or tractors.

- Filling water into the caravan vehicle

-It is suitable for water-based fluid medicines that are not thick in consistency.

5- 7-8 meters vertical

30 - 40 meters horizontal pressing power,

It is suitable for barrels,

It is suitable for barrels,

50mm width

148.60mm length

VOLTAGE : 12v 5 amp  three draw ampere : 3.0

Contents;

-Midapo Diverç

-3 meters TSE 2x075 Cable

- On/Off switch

-Battery clips