Car Door Anti Scratch Edge Guards Universal U Shape Custom Chrome Plated DIY Moulding Trim Strip Line for Sedan Car Pickup Air Vent Door Edge Decoration Silver

OverviewHow to Install 1. Clean the door edges to remove oil, wax and dust.Make sure the door is dry before proceeding. 2. Remove the tape from the lining tip (make sure the tape is installed inside the door).3. From the top, insert the lining into the edge of the door until the lining is fully seated. 4. Press the lining along the edge of the door with your thumb until it is fully seated. 5. Repeat step 4 until all edges are protected.Use scissors to cut off the unused lining on the other door edges. 6.Let the liner dry on its own and do not get wet for at least 12 hours.