Coaster and Stand Epoxy Mold Set - Square - Code: 323-374

Coaster and Stand Epoxy Mold Set - Square

6 Coaster molds + 1 stand mold

Resin epoxy silicone injection molds are heat-resistant and easily separated, that is, they can be removed after the product has dried, and they are a resin epoxy mold that can be protected in a hot environment with a high temperature of 200 to 300 degrees on average. In addition, our silicone molds are resin molds that can be used many times and are not disposable. Resin epoxy molds, which can be used in many areas, can create differences in many sectors depending on your imagination. We currently have more than 600 resin epoxy mold models in Turkey.

Use of: Pour 1 part hardener into 2 parts resin into a container and mix slowly until there are no air bubbles. Mix from right to left, from left to right.
and mix thoroughly from bottom to top for 2-3 minutes. While mixing
A homogeneous mixture should be achieved by touching the bottom and sides of the mixing rod to the container.
Then the mixture is rested for 5 minutes and poured into the mold and left to dry.
It can be touched by hand after about 6 hours. It hardens completely within 12 hours. 48 hours
It becomes a scratch-proof glass.

Color : Transparent