Radio Wireless Remote Control Shutter Release for Nikon Z5 Z6 Z7 Z6II Z7II D750 D780 D7500 D7200 D5300 D5600 D5500 D3300 D3200 D610 D600 Df D7100 D7000 D5200 D5100 D5000 P1000 & More Nikon Camera

OverviewThis Wireless Remote is designed for cameras that has a remote shutter socket. The system works at a 433MHZ frequency and has 16 available channels. In addition, this wireless remote system adopts a technology to allow the transmitter trigger the receiver without direct line of sight up to 30 meters. The transmitter can trigger the camera shutter at five modes: single shot, 5 seconds delay shot, 3 continuous shots, unlimited continuous shots and bulb shot/bulb lock.

It works with selected Nikon cameras as below:

D3100,D3200,D3300,D5000,D5100,D5200,D5300,D5500,D5600,D600,D610,D750,D780,D7000,D7100,D7200,D7500,D90,Df,Z7II,Z7,Z6II,Z6,Z5,Coolpix P7700,Coolpix P7800, Coolpix P1000

Important - How to use:

1. Install the CR-2 battery to the receiver and 23A battery to the transmitter. (Make sure to remove the plastic protective paper on the battery before installation)
2. Set the receiver and transmitter to the same channel (Normally the channel is already matched when you receive the package, so actually you don't need to set it, but if you ever reset the channel, make sure they are the same)
3. Once the batteries are properly installed and the channels are matched, when you press the shutter button on the transmitter, both the LED bulb on the transmitter and receiver will light up. (If not, please check if the battery is installed correctly or the battery is dead)
4. Once the transmitter matches the receiver, connect the receiver to the camera via the camera connecting cable which is included in the package, then set the transmitter into the working mode you want and finally press the shutter button to take a photo wirelessly. Connectivity Technology: Infrared Special Feature: Ergonomic