Do not add detergent! It can only be heated with ordinary water, does not contain any chemicals, and only uses steam cleaning.
after cleaning,please place the cleaner for a period of time,let its body cool,and then pour out the remaining water,which helps to protect the heater.
Add 300 ml of water, heat for 5 minutes, work for 10-15 minutes, no need to add water frequently,
After the steam is completely exhausted, wait for the steam cleaner to cool about 10 minutes, open the lid, add water again, heating 3-5 minutes, you can continue to use.
When adding water, do not fill the water too full, because there is a pressure relief valve on the lid, water too full will overflow from the hole in the pressure relief valve.
Tip-just rotate the safety cover of the steam cleaner until it is fixed. Do not screw too tight, too hard may damage the internal rubber ring, leading to the lid failure and can not be properly sealed. If you can not open the security cover after using it, try again in a few minutes. Only Open the safety cover when the power is off and the internal steam is cool to avoid scalding.
when changing the use of props,do not use brute force to remove,be sure to rotate before removing the use of props