strong Tile Leveling System 1.0mm, Wall Tile Leveler Tools Set - with Tile Plier, 300PCS 2-13mm thickness Tile Spacers Clips and piler for Bath Room, Living Room Floor & Wall, Easy Installation

OverviewWHY CHOOSE STRONG TILE LEVELING SYSTEM KIT? 1. Ensures that tiles remain level and eliminates lippage. 2. Fast & easy to install & remove. 3. This system helps to reduce the tile installation, minimizes the effort and maximizes installers productivity allowing to achieve a perfect flat. How to Use： step1: Place the clip into the tile bottom step2: Square the tile and tapit with a rubber hammer step3: Insert tile wedges, push with a push pliers step4: One tile with four sets of wedges step5: Ensure that the cement is fully solidified and remove tile spacers. Usually after 24 hours(Tap by hammer or kick from the side, not pull up) Warm Tips: 1. Before putting the tiles, remember to erase some of the cement on the edge of tile. Do not fill up the tiles with cement. This will prevent the cement from being wrapped in the clamps after the clips are placed. The solidification will affect the removal of the clips. 2. If there is too much cement in the gap between the tiles, it is recommended to clean them with tools such as blades.