كرة القدم المنصهرة F5A1000 باللون الأحمر أفضل كرة قدم داخلية أو خارجية للاعبي كرة القدم ومشجعي كرة القدم - أحمر

About football maintenance

Inflatable

Before inserting the air needle, it is usually moistened with water or soapy water. Inflate slowly little by little to gradually make the ball bulge. If a compressor or similar device is used to force a large amount of air in, the bladder valve will conflict with the stitching, causing the ball to rupture.

To comply

The air pressure indicated on the valve opening stipulates, do not inflate it too much.

Check for air leaks

Sand or dust entering the air valve can easily cause air leakage. Wash carefully and often with soapy water. When a new ball is inflated, air will leak out of the pins. This is simply the air that is filled between the bladder and lining when the ball is made. This is normal and does not indicate a leak.

After use

The air must be released after using the football. Maintaining high air pressure when the ball is not in use will cause expansion and deformation. After use, use a brush to sweep away the mud and sand in the seams of the ball. Wipe the surface with a soft damp cloth.

Care and Storage

(1) After use on rainy days, wipe clean and dry in a cool place.

(2) Keep the ball in a dry, ventilated place, away from direct sunlight.

(3) Keep the ball away from sharp objects, such as barbed wire, broken metal mesh, rose thorns, cactus or other things that may puncture the ball. Some small holes that are not noticeable to the naked eye may cause air leakage. Do not expose the ball to direct sunlight for long periods of time The place to shoot. Keep the ball away from places that are too hot or humid.