English
  • استرجاع مجاني وسهل
  • أفضل العروض
English
المفضلة
wishlist
سلة التسوق
cart

Hotend Hardened Steel Nozzle, Up to 500°C, Plated Copper Heater Block with CHT Brass Nozzle 0.4mm Compatible with Bambulab X1 / X1 Carbon Combo P1P 3D Printer

قبل:
161.95 د.إ.‏
الآن:
151.95 د.إ.‏ شامل ضريبة القيمة المضافة
وفرّت:
10.00 د.إ.‏ خصم 6%
باقي 1 وحدات في المخزون
noon-marketplace
احصل عليه خلال 21 فبراير
اطلب في غضون 6 ساعة 2 دقيقة
VIP ENBD Credit Card

VIP card

احصل على 5% رصيد مسترجع باستخدام بطاقة بنك المشرق نون الائتمانية. اشترك الآن. قدّم الحين

التوصيل 
بواسطة نوون
التوصيل بواسطة نوون
الدفع 
عند الاستلام
الدفع عند الاستلام
عملية 
تحويل آمنة
عملية تحويل آمنة
1
1 تمت الإضافة لعربة التسوق
أضف للعربة
نظرة عامة
الميزات الأساسية
  • ? Upgrade Nozzle: Crafted from hardened steel for increased wear resistance and longevity. The nozzle features an improved design with a 0.4MM inner wall roughness, minimizing blockages and enhancing print quality.
  • ? All Metal Design: The heater block has been enhanced, shifting from brass to a smaller, lighter chromium-zirconium copper nickel-plated version. This upgrade supports temperatures up to 500℃ and boasts faster thermal conductivity,
  • ? Design Upgrade: Comprehensive improvements include a chromium-zirconium copper nickel-plated heating block for superior high-temperature resistance and rapid heat transfer.
  • ? Wide Compatibility: Fully compatible with BambuLab X1 and X1C 3D Printers, this high-temperature kit supports a broad range of filament materials including PLA, ABS, PETG, TPU, PP, PC, Nylon, PEEK, PEI, and more,
  • ? Package List: Includes 1 set of the hardened steel nozzle full metal hotend kit, 2 Hotend Silicone Covers, 1 extra 0.4mm Hardened Steel Nozzle, 1 Extra Snap, and a 24V Ceramic Heater Thermistor for a comprehensive setup and maintenance experience.
نظرة عامة

Hotend Hardened Steel Nozzle, Up to 500°C, Plated Copper Heater Block with CHT Brass Nozzle 0.4mm Compatible with Bambulab X1 / X1 Carbon Combo P1P 3D Printer


✅ - Upgrade to Bimetal Heatbreak

Upgrade heatbreak to be Bimetal heatbreak -TC4 Titanium alloy and Plated Copper to have better heat dissipation. Bigger size ,and not easy to be broken.

✅ - Nozzle structure upgrade

Adopt threaded connection between heat block and heatbreak to solve the phenomenon of falling off, and can be disassembled and replaced to reduce the cost of use.

✅ - One-piece interference fit between heatbreak and block

The structure of the heatbreak upgraded, and the step limit is added at the cooperation and the heating block to solve the phenomenon of material leakage and shedding.

✅ - Heater block and nozzle material upgrade

Block is made of plated copper, high temperature printing resistance, fast heat conduction.

Nozzle is made of hardened steel SKD11 after quenching and hardening treatment, more wear-resistant,longer lifetime, and higher temperature.


TZ 2.0 upgrade hotend is made of all metal material for the best performance of printing


Excellent performace make your 3D Print can be one step faster

All Metal Design , TZ2.0 Print flow up to 35mm³/S. Heater block is connected with the radiator by two titanium alloy screws to advoid bending and breaking of the pipe during high-speed printing

Hotend Hardened Steel Nozzle, Up to 500°C, Plated Copper Heater Block with CHT Brass Nozzle 0.4mm Compatible with Bambulab X1 / X1 Carbon Combo P1P 3D Printer

Hotend Hardened Steel Nozzle, Up to 500°C, Plated Copper Heater Block with CHT Brass Nozzle 0.4mm Compatible with Bambulab X1 / X1 Carbon Combo P1P 3D Printer

تمت الإضافة لعربة التسوقatc
مجموع السلة 151.95 د.إ.‏
Loading