Resin Epoxy Resin Material - 6000 ml

RESIN EPOXY RESIN MATERIAL - 6000 ML

• OUR MATERIAL IS 2 UNIT RESIN + 1 UNIT FREEZER.
• IT MUST BE USED BY MIXING SLOWLY IN A 2+1 RATIO, ANY OTHER MIXING RATIO IS NOT CORRECT AND WILL DISTURB THE CHEMICAL REACTION OF THE MATERIAL. KEEPING IT IN HEAT BEFORE USE FACILITATES AIR EXIT AND IS RECOMMENDED.
• MIXING MUST BE MADE SLOWLY (EXAMPLE: MIXED WITH 200 GR RESIN + 100 GR FREEZER)
• MIXTURE MUST BE MADE IN ACCORDANCE WITH THE AMOUNT TO BE USED.
• IT IS RECOMMENDED THAT THE CONTAINER IN WHICH THE MIXING WILL BE MADE IS LARGE.
• IT IS RECOMMENDED TO FIRST FREEZE THE CONTAINER IN WHICH THE MIXTURE WILL BE MADE, AND THEN PUT THE RESIN IN ACCORDANCE WITH THE MIXTURE RATIO.
• THE MATERIAL SHOULD BE MIXED SLOWLY IN ONE DIRECTION, AFTER THE MIXTURE IS FINISHED, IT IS RECOMMENDED TO PUT IT INTO A LARGE CONTAINER SUCH AS A BASIN AND LET IT REST FOR 0-30 MINUTES DEPENDING ON THE AMBIENT TEMPERATURE TO ELIMINATE THE AIR.
• IN CASTING OPERATIONS, AIR CAN BE REMOVED FROM THE SURFACE BY USING A HOT APPLICATION IN THE ROUGH WHICH IS RESTING OR DURING CASTING.
• AS WITH EVERY CHEMICAL MATERIAL, THIS MIXTURE HAS A POT-LIFE (RESIDENCE TIME), THIS VALUE VARIES DEPENDING ON THE WIDTH OF THE CONTAINER IN WHICH THE MIXING IS MADE, THIS TIME IS LONGER IN WIDE CONTAINERS, THE REACTION ACCELERATES IN NARROW CONTAINERS, THIS MUST BE CONSIDERED WHEN MIXING IS MADE.
• Although the drying time of the material varies depending on the environment and the thickness applied, on average; TOUCH DRY: 12-24 HOURS; FULL DRY: 2-4 DAYS (IT VARIES DEPENDING ON THE THICKNESS APPLIED AND ENVIRONMENTAL CONDITIONS).
• AFTER THE CASTING PROCESS, IT IS RECOMMENDED TO KEEP IT IN A COLD ENVIRONMENT DURING GELATION, AND TO EXPOSE IT TO A HOT ENVIRONMENT OR HEAT AFTER GELATION, THUS DRYING WILL BE ACCELERATED.
• THE MENTIONED TIME VALUES VARY DEPENDING ON THE ENVIRONMENT, THE CONTAINER IN WHICH THE MIXING IS MIXED, THE AMOUNT MIXED, AND THE THICKNESS TO BE APPLIED. NO VALUE IS EXPRESSIVE.