ANVESE Pet Microchip Scanner USB Rechargeable RFID EMID Micro Chip Reader Scanner 134.2kHz Standard FDX-B ISO11784/ISO11785 Support Data Export Pet Chip ID Scanner for Animal/Pets/Dogs/Cats (W90S)

Overview【Why need pet microchip scanner】Pets are your little friends who accompany you every day, so you don't want to lose your pets and accidents. The pet scanner can help you accurately scan the pet chip ID. Through the Pet ID to know about the pet's information and help it go home.【Widely Support Rang】-The handheld reader supports for ISO 11784/11785, FDX-B and ID64 RFID, easy to operate, one button to read; NOTE: The reader CAN NOT read AVID chips. It only the 15-digit international standard protocol (134.2 kHz) can be recognized.【Detail Operation Manual】1. Press the pet microchip to start the device, enter the scanning mode, and start scanning the pet in the injection microchip scanner.2. Tags are scanned, the reader will enter the standby state. 3. Place a tag in the antenna loop and press the button to read. 4. Press the button to read the next label. 5. If no label is scanned, the device will automatically turn off after 180 seconds, or you can press and hold the button for 3 seconds to turn off the device.【Upgrade design】The handheld reader has backlight screen makes it convenient; The history data can be read in the internal reading mode; Technology support,included mute model,language,dataclearing and other settings.【Packing included】-1x Microchip Reader; 1x USB catable; 1x User Manual Connectivity Technology: USB Cable 【Why need pet microchip scanner】Pets are your little friends who accompany you every day, so you don't want to lose your pets and accidents. The pet scanner can help you accurately scan the pet chip ID. Through the Pet ID to know about the pet's information and help it go home. 【Widely Support Rang】-The handheld reader supports for ISO 11784/11785, FDX-B and ID64 RFID, easy to operate, one button to read; NOTE: The reader CAN NOT read AVID chips. It only the 15-digit international standard protocol (134.2 kHz) can be recognized. 【Detail Operation Manual】1. Press the pet microchip to start the device, enter the scanning mode, and start scanning the pet in the injection microchip scanner.2. Tags are scanned, the reader will enter the standby state. 3. Place a tag in the antenna loop and press the button to read. 4. Press the button to read the next label. 5. If no label is scanned, the device will automatically turn off after 180 seconds, or you can press and hold the button for 3 seconds to turn off the device.