ECA Niobe Basin Mixer 102188053

Product features

·        Spout length is 112 mm

·        Spout height is 84 mm

·        Lime breaker aerator

·        Maximum 7.8 lt water flow per minute at 3 bar pressure

Before Installation:  

·        Warranty Period: 20 Years Warranty.  

·        Authorized Service Number: 444 0 322

·        Before assembling your luminaire, review its manual.

·        Keep your manual during the warranty period of your luminaire.

·        Keep your luminaire in its original packaging until the place where it will be installed.

·        If the mains pressure is above 5 bar, working at this pressure for a long time will shorten the life of your armature. For this reason, use an E.C.A pressure reducing regulator at the installation inlet.

·        Install an E.C.A filter at the entrance of the installation to which you will connect your luminaire.

·        Before connecting your armature to the installation, clean the inside of the pipes by running some water.

·        Use E.C.A Filtered Intermediate Tap to connect sink and sink faucets to the installation.

·        Chrome-plated fixtures spa, etc. Do not use in places.

·        Do not leave your luminaire installed in buildings under construction for a long time. Construction mortar, lime etc. materials may spill on the luminaire. In addition, chemical substances in the air may combine with the humidity of the air and cause deterioration on the luminaire surface. If such materials have fallen and stuck on the armature during construction, do not scrape it using hard objects. If the luminaire will stay in buildings under construction for a long time, insulate it from the environment by putting a bag over the luminaire.

·        Your luminaire is designed to operate at ambient temperature between 5°C and 65°C. Take the necessary precautions to prevent your luminaire from being affected by frost, especially in environmental conditions below 5°C.  

During Assembly:  

·        During the assembly of your luminaire, do not touch the surfaces of your luminaire with keys, especially pipe wrenches.

·        For easy and smooth mounting of bathroom, sink and sink faucets on the wall, use a mounting template during the laying of the piping.

·        Never use a wrench when assembling the flexible connection hoses of sink and sink faucets to the body. The sealing element (O-ring) located at the end of the hoses entering the body is sufficient for sealing. Make sure that the hoses are properly mounted to the body.

·        After connecting your armatures to the installation, open the valve and observe whether there is any leakage at the connection points of the armature. If there is a leak at the connection points, make a suitable assembly to seal the connection. Do not use the luminaire without a leakproofness check.  

During use:  

·        Wiping your armature with a soapy cloth and drying it with a dry cloth is sufficient for cleaning.

·        In places where the water hardness is high, you can prevent the formation of gray spots on the surface by wiping the fixture surface more frequently.

·        Do not use sponges with a green side or steel wool, or cleaning agents containing acid, containing abrasive and hard materials to clean the surfaces of the luminaire.

·        Replace your armatures once every six months or when   wipe with a soft cloth.

·        Use original E.C.A spare parts in order not to deteriorate the product feature in case of malfunctions that may arise from all kinds of environmental conditions and usage errors.