Eminönü Wholesaler Epoxy Heart Model Silicone Mold Jewelry Storage Box 8 x 9 cm

Package Quantity 1 

DIMENSIONS

Height 3.7 cm

 Dimensions: 8 x 9 cm

Resin epoxy silicone injection molds are heat-resistant and easily separated, that is, they can be removed after the product has dried, and they are a resin epoxy mold that allows it to dry quickly in resin epoxy castings and can be protected in a hot environment with a high temperature of 200 to 300 degrees. In addition, our silicone molds are resin molds that can be used many times and are not disposable. Resin epoxy molds, which can be used in many areas, can make differences in many sectors depending on your imagination.

Usage: Pour 1 part hardener into 2 parts resin into a container and mix slowly until there are no air bubbles. Mix from right to left and from left to right.
and mix thoroughly from bottom to top for 2-3 minutes. While mixing
A homogeneous mixture should be achieved by touching the bottom and sides of the mixing rod to the container.
The mixture is then rested for 5 minutes and poured into a mold to dry. 
It can be touched by hand after about 6 hours. It hardens completely within 12 hours. 48 hours
becomes a scratch-proof glass