Etwinkling Filament Rainbow

280.00

 344.00

(Incl. VAT & Import duty)

Saving:

 64.00

18% Off

BANK OFFERS

Earn 5% cashback with the Mashreq noon Credit Card.

Prepaid only

SELLER

Item as Described

Partner Since

Product Overview

Overview

Color

Colored

Esun eTwinkling FilamentRainbow

**This material is based on PLA material with glitter powder, which is easy to print in PLA and has special glitter color characteristics.

*Sparkling effect (sparkling)

*Low shrinkage (no bending, no cracking)

*High precision (smaller wire diameter tolerance)

*Fine glitter powder is added to the PLA raw material base to print the model, giving you a rich visual experience.

*The wire diameter tolerance of consumables is controlled within 0.03mm, and the printing effect is better.

*NThere is no residual waste,threeEnvironmentally friendly raw materials and recycled materials are used.

*UApplication areas;daily accessories, decoration toys, statues, etc.

*Compatible with 99.99% of FDM printers on the market.

FILAMENT PROPERTIES

3D PRINTING FILAMENT	eTwinkling
Density(g/cm ^3 )	1.41
Heat Distortion Temperature (℃, 0.45MPa)	67
Melt Flow Index(g/10min)	2.5(190°C/2.16kg)
Tensile Strength (MPa)	58
Elongation at Break(%)	-
Flexural Strength(MPa)	70
Flexural Modulus (MPa)	2100
IZOD Impact Resistance (kJ/㎡)	4
Durability	4/10
printability	9/10
RECOMMENDED PRINTING PARAMETERS
Extruder Temperature(℃)	200 – 230℃ Recommended temperature：210℃
Bed temperature(℃)	45 – 60°C
propeller speed	100%
Print Speed	40 – 100 mm/sec
Heated Bed	Optional
Recommended Building Surfaces	Masking paper, PVP solid adhesive, PEI

Measures

The flashing line has strong rigidity and is not easy to bend. Excessive bending of the wire should be avoided as much as possible in the feed pipeline.
To prevent clogging and print, it is recommended to use a large nozzle and higher temperature.

Specifications

Colour Name

Colored