EZ Connect Tire Repair

OverviewCasite EZ Connect Tire Repair with its 1-touch actuator and long delivery hose will help inflate your tire with its NON-FLAMMABLE proprietary compounds to enhance coating and sealing, will inflate to maximum pressure to get you out of harms way. Will clean up with soap and water and is safe for the user, safe for the tire technician and safe for the environment. Directions: - If possible, position vehicle with tire valve between 4 o’clock to 8 o’clock positions. This allows the Casite EZ Connect Tire Repair can to be placed on the ground for hands free operation. Do not remove puncturing object if its still in the tire. - If temperature is below 32 deg. F, warm can using vehicle interior heater. Remove cap from can. firmly grasp the black outer sleeve of the EZ Connect nozzle and slide it over the tire valve stem pushing firmly until the sleeve snaps into place. - Partially depress the 1-Touch actuator button allowing solution to flow into the tire. If there is no leakage around the tire valve, completely depress the button to lock it in place. You can walk away while EZ Connect Tire Repair seals and inflates tire – hands free! - Allow a couple of minutes to empty can contents into tire. This time will vary depending upon temperature and tire pressure. Disengage 1-Touch actuator by pressing inward on tab located behind the push button area. - Detach the EZ Connect fitting from tire valve stem by grasping black outer sleeve and quickly sliding it back. Replace valve extension and/or protective cap. Immediately drive vehicle for 2-3 miles at slower speed to spread sealant inside tire and allow tire pressure to increase. Before driving at highway speeds, the tire should be checked for adequate inflation pressure and inflated to the pressure recommended by tire manufacturer.