Office Supplies

Office Electronics

Printer Accessories

Printer Transfer, Belts Rollers & Units

eSUN

PVA Filament Natural 0.5kg

397.50

(Incl. VAT & Import duty)

BANK OFFERS

Earn  19.88 cashback with the Mashreq noon Credit Card.

Prepaid only

SELLER

Item as Described

Partner Since

This item is eligible for free returns

Product Overview

Overview

Color

Natural

Esun PVA Filament Natural

PVA is a water-soluble material, generally used as a support material without adding any chemicals and special treatments. Put the part in a warm water bath, dissolve faster. After dissolving, there is no residue on the model surface with smooth effect; can be used with PLA, TPU, PA(nylon) and other consumables to print support materials with highly complex shapes or partially closed cavity models. It is also a good choice for working with multi-nozzle printers.

FILAMENT PROPERTIES

3D PRINTING FILAMENT	PVA
Density(g/cm ^3 )	1.25
Heat Distortion Temperature (℃, 0.45MPa)	-
Melt Flow Index(g/10min)	-
Tensile Strength (MPa)	22
Elongation at Break(%)	360
Flexural Strength(MPa)	-
Flexural Modulus (MPa)	-
IZOD Impact Resistance (kJ/㎡)	-
Durability	7/10
printability	5/10
RECOMMENDED PRINTING PARAMETERS
Extruder Temperature(℃)	180 – 230℃ Recommended temperature：190℃
Bed temperature(℃)	45 – 60°C
propeller speed	100%
Print Speed	20 – 50 mm/sec
Heated Bed	Required
Recommended Building Surfaces	Masking paper, PEI

NOTE

1. We recommend drying the material (45°C/＞10H) before printing to get perfect printing effect. It is recommended to use eBOX(3D filament dryer) when printing.
2. In order for the first layer to bond well with the base material, it is recommended to set the distance between the support and the model to 0, Slow down and turn off the fan.

Specifications

Colour Name

Natural