Renault Fluence 2010 Onwards Door Handle 4 Doors Stainless Steel

MYTUNING

                                                                                                    Product P Features:

Chrome products are molded specifically for the part of the vehicle where they will be applied. is produced

Chrome products are produced from class A quality stainless steel.  

The products are sent ready for assembly with high quality double-sided acrylic tape on the back. 

                                                                                             Installation Instruction:

1- Install in a dry and dust-free environment.     

2- During installation, the ambient temperature should be between 15°C and 35°C. If the ambient temperature is below 15°C, dry the surface with a hair dryer etc. Install by heating with.  

3- Before removing the tapes of the part to be bonded, first try the assembly, starting from the oval and closed surface.  

4- Clean the surface to be bonded meticulously with a cotton cloth, rubbing alcohol or pure alcohol. After cleaning the surface to be bonded, remove dust and oil  protect. DO NOT clean the surface to be bonded with oily or additive substances such as wet wipes, water, thinner, gasoline, diesel oil, cologne.  

5- After applying the cleaning process to the surface to be bonded, start the bonding process after waiting 5 minutes.  

6- Remove the protective surface of the double-sided tape on the product and assemble it, starting from the oval and closed surface.  

7- During the assembly process, pat the product with a soft cloth or fingertips to make it fit. Press on the part for a minute and again with a hair dryer etc. Apply heat using the help.  

                                                                                                 CAUTION                 

Since the tape used will show its full properties within 24 hours, handle the glued part carefully during this period.  
To prevent the glued part from loosening, tape it with paper or packaging tape that you can remove after 24 hours.  
Take care not to wash your car within 24 hours.