DESCRIPTION OF BLUETOOTH REMOTE
CONTROL
Button battery: CR1620 (replaceable)
Voltage: 3V
Battery capacity: 70mAh
Bluetooth version: 4.2
Bluetooth Name: VIP
Sleep standby current: 600uA
Shutdown standby current: 1uA
Photos taken frequency: >10000 times
PRODUCT DATA:
Product material: ABS + PC
Tube material: Aluminum alloy oxidation
Color: Black
The stretching range of chuck: 65-95mm
Handle diameter: 30mm
Interface: British standard 1/4 universal
Accessories: Fill light, pan tilt, inch 1/4 nut, mobile phone clip, self timer bar, 1 meter charging cable, bluetooth remote control.
WIRELESS INSTRUCTIONS:
1. Press and hold the switch for 3 seconds to start up.
2. Press and hold the switch for 3 seconds to shut down.
3. After power on, there is no pairing connection status, and it will automatically shut down after 5 minutes.
4. Turn on the bluetooth mobile phone to search for the bluetooth device name VIP, click Connect, after the successful pairing connection, the ndicator light goes out, no operation, after 10 minutes, disconnect and enter the sleep state, after another 10 minutes, no operation, shutdown.
5. After entering the sleep state, press the keyonce to connect the mobile phone.
6. Turn off and power on again. The paired mobile phone and remote control can automatic pairing.
LAMP BEADS 48 PCS 2835 MODEL (24 POSITIVE WHITE & 24 WARM WHITE) 0.2W/PCS
Working current: Single color first gear 300mAh, second gear 500mAh, third gear 764mAh. Dual color first gear 480mAh, second gear 850mAh, third gear 1.22A.
Standby current of lamp board: <0.5UA
Charging current: ~625mAh
Full charge time: 200minutes
Power: 9.6w
Working time: Single color, 274 minutes for first gear, 150 minutes for second gear, 125 minutes for third gear; two colors, 205 minutes for first gear, 108 minutes for second gear, and 65 minutes for third gear.
Color temperature: Normal white 6000-6500k, warm
white 3000-3200k.
Lighting mode: Warm light/cold light / cold / warm light,
three gears in each, with 9 dimming gears in total.
Power supply mode:
1. Built-in 18650 battery power supply 1200mAh
2. External USB 3.7-5V, can work while charging.
FILL LIGHT INSTRUCTIONS:
Click the key to turn on the light, weak, medium, strong, three gear mode; continue to click to cycle to warm light; recycle to mixed light; long press for two seconds to turn off the light. When charging, the red light is on, when it is full, the light is off.
Fill light battery charge discharge protection function:
Fully charged 4.2V, when the voltage drops to 3V, stop
working, need to charge before use.
Compatible with: iOS & Android smart phone Wireless remote control
Wireless Name: VIP
Model Number | Selfie Stick Tripod P40D-5 |
Model Name | Selfie Stick Tripod Ring Light For iOS & Android Phones |