Self-Watering Plant Insert Spikes - Automatic Watering Devices for Indoor & Outdoor Potted Plants, Ideal for Vacation Drip Irrigation System, Effortless Plant Care Solutions.

OverviewSpecification:
Material: high-quality plastic
Color: Beige*3, Green*3, Pink*3

Packing List: 9 Pieces of Automatic Irrigation Waterers

Feature:
- No need to drill holes or cut the bottle at the bottom,

- Apply to bottle, fill with water, plug in, done.

- Constant pressure design, stable water flow. Our new valve switches are ideally sized and easy to operate.

- The control valve switch will slowly release the water to the plant. Dustproof and fully enclosed design, no dust or insects will fall into it.

- No need to worry about your plants or flowers when traveling or on vacation.

How to install:

• Rotate the filter to the inside of the product spout.
• Insert the valve into the square hole in the valve body with the drip portion facing down.
• Install the bottle, keeping it fully installed without tilting to prevent leakage.
• Insert the product vertically deep into the soil. (some inclinations apply)
• Adjust the valve for the proper drip-rate.

Notes:
1. Before each use, adjust the maximum water flow to ensure that there is no air in the switch, and then reduce the water flow.
2. After adjusting the flow rate, bury the switch outlet in the soil, and the flow rate is stable.
3. Keeping the spikes vertical is the most important thing.
4. The pictures of the products are all taken in kind, but because of different light and shooting angles,
5. Or due to the display deviation of different monitors and personal understanding of color,
6. The resulting chromatic aberration problem is inevitable, and this problem is not a quality problem.