Solar Security Light - IP66 Waterproof, Three Smart Lighting Modes, with Motion Sensor for Enhanced Outdoor Safety

<p>Warm reminder: <br />1, the solar panel should be activated under 2-3 seconds of strong light, or fully charged before the first use of solar energy. <br />2, do not fold the solar panel frequently. <br />3, the battery may fail in the absence of good sunlight. <br />4, if there is no good sun or winter sunshine, it may take longer to fully charge, especially in the north District, this thing is normal solar products. <br />5, if not used for a long time, the product can be fully charged in the sun, and every three months in the sun charged once, to extend Long battery life.</p>

<p>Product Overview: After receiving the product, long press (3 seconds) the switch at the bottom of the solar panel to completely cover the solar panel, if the light is on, then Indicates that the product is normal.</p>

<p>Installation: Attach the lamp to the wall using the screws provided for the area you wish to light. Solar panel charging:After installation, adjust the solar panel Angle and ensure that the solar panel can directly get good sunlight, no any cover or glass. Under normal circumstances, in ideal bright sunlight, it can be fully charged in four hours.</p>

<p>Motion sensor:After being in the selected mode, the motion sensor automatically turns on in the dark, and it switches when people get closer to 6-8 meters go to highlight mode, and when people leave for 20 seconds or so, it will switch to the mode state of your choice.</p>

<p>Product features: <br />1. Integrated design of PIR motion sensor and night sensor. <br />2. Use sunlight to store electricity. <br />3. Built-in lithium-ion battery. The battery has a charge and discharge protection circuit to prevent excessive charge and discharge. <br />4, fully charged in low light mode can provide more than 40 hours of lighting time. <br />5, protection level :IP66.</p>