Solder Desoldering Pump Electric Soldering Iron Auxiliary Tool Manual Desoldering Suction Pump Vacuum Solder Removal Tool

OverviewThe solder desoldering pump is used to remove excess or residues of metallic solder and flux, which are formed during the installation or dismantling process.

It removes solder residue and allows you to carefully remove the chips without losing their performance

Get the solder off and replace them with newer ones, which it is very common when soldering, so this desoldering removal tool will be your perfect companion to the solder away effectively.

With metal body and high pressure vacuum, this desoldering pump can help you the solder away effectively. Solder fit your hands perfectly no matter if you are left-handed or right-handed.

How to Use the Desoldering Pump
Step 1: Press the plunger down until it is been locked and you will hear a click;
Step 2: Make the tip of the soldering iron to the solder joint and allow the solder to become fully liquid;
Step 3: Move the tip of the pump next to the molten solder. Move the iron out of the way and immediately cover the liquid solder puddle with the pump's tip. Pull the trigger;
Step 4: Repeat this process if necessary.

How to Use the Solder Wick
Step 1: Place the wick over the solder you need remove and then just push the heated soldering iron tip onto the wick;
Step 2: Remove the wick once the solder has been absorbed;
Step 3: Cut off the used part of the wick;
Step 4: Repeat this process if needed

Package included:5pcs Solder in one pack