WEICON Belt Repair Kit 550 g | Quick Repair, Touch-up, and Coating of Rubber Surfaces

OverviewWEICON Belt Repair-Kit | Fast repair, touch-up and coating of rubber surfaces. Application: - Thoroughly clean surfaces to be treated (recommendation: WEICON Surface Cleaner) - Roughen surface and remove grinding dust - surface pre-treatment - apply WEICON Primer G as adhesion promoter and allow to cure for approx. 30-60 minutes - mix the two components - add the hardener to the resin package - mix the two components thoroughly and homogeneously with each other - apply the adhesive to the surface to be treated - fill the material - post-processing is possible after approx. 8 hours - ready! Technical data: Consistency: pasty Color after curing: black Pot life at +20 °C: 20 minutes Final hardness after: 24 hours Temperature resistance (wet): -60 °C to +6 0°C Temperature resistance (dry): -60 °C to +100 °C Properties: The Belt Repair Kit contains, among others, WEICON Urethane 85 2-Component Adhesive, which has been specially developed for the repair, touch-up and coating of all common metal parts and rubber parts such as NBR and SBR. WEICON Primer G is recommended for the pretreatment of the surface. This serves as an adhesion promoter and ensures an even stronger adhesive strength of the PU adhesive. Thanks to the elasticity of the adhesive, it can also be applied to parts that are exposed to vibration, movement, abrasion, and impact. In addition, the polymer adhesive provides excellent protection against wear, ensuring that treated parts can still be used for a long time without losing quality. Safety and health: When processing WEICON products, the physical, safety, toxicological, and ecological data and regulations in our EC Safety Data Sheets must be observed.