WEICONLOCK® AN 305-42, 20 ml, Hydraulic and Pneumatic Sealing

OverviewWEICONLOCK® AN 305-42 | Sealant for sealing hydraulic pneumatic seals | non-labelled & DVGW-approved WEICONLOCK® AN 305-42 is a sealant for sealing and installing pipe seals, hydraulic seals and pneumatic seals. It prevents the escape of hydraulic fluids in pipes for gas, water, etc.. It is an alternative to PTFE sealing tapes and hydraulic sealing rings to perfectly seal hydraulic connections. WEICONLOCK® AN 305-42 is medium viscosity and medium strength. The sealant can be dismantled normally. The adhesive can be optimally dispensed thanks to the dispensing tip and the WEICON Pen system. PROCESSING: The special adhesive heat is applied evenly with the dispensing tip; avoid direct contact between dispensing tip and metal. Assemble and tighten parts. For press-fit joints and larger parts, apply a thin, even coat to both surfaces. Do not pour WEICONLOCK® that has already come into contact with metal back into the bottle. Even the smallest particles of metal lead to hardening in the bottle. in the bottle. STORAGE: WEICONLOCK® can be stored for at least 24 months in the sealed original containers at room temperature. Avoid sources of heat|direct sunlight. The air content in the pen keeps WEICONLOCK® liquid. SAFETY: When processing WEICON products, the physical, safety, toxicological and ecological data and regulations in our EC Safety Data Sheets must be observed. TECHNICAL DATA: Colour: brown Fluorescent: yes Hand strength at room temperature: 10 - 20 min